Application-specific
Functional objectives, formulation, process conditions and application-specific evidence should be supplied by the buyer and tested against the selected product.
Specification matters
Define the specification before asking which option may fit.
This page organises the technical, documentary and commercial questions needed to review a buyer-specific guar gum sourcing option.
At a glance03 / points
- Primary grade focus
- Food-grade E412
- Target mesh discussion
- 100 or 200 mesh, conditional
- Target viscosity discussion
- Approx. 3,500 or 5,000 cps, method-dependent
Fast preparation
Requirement summary
- Application
- Finished product, process and intended function
- Grade
- Food-grade E412 or a buyer-specific industrial enquiry
- Viscosity target
- Target value or range
- Complete test method
- Concentration, hydration, temperature, instrument and reading conditions
- Mesh
- Particle-size target and method where defined
- Physical and chemical requirements
- Parameters, limits and methods
- Microbiology
- Required panel, limits and methods
- Residues
- Applicable metals, pesticide, PCP or statement scope
- Quantity
- Expected volume, unit and trial or repeat context
- Packing
- Format, size and labelling needs
- Destination
- Delivery country or port and applicable market context
- Documents
- Technical, batch, certification, sample or testing needs
- Timing
- Intended purchase and delivery context
Not a confirmed stock list
Food-grade E412, 100 mesh, 200 mesh and approximately 3,500 or 5,000 cps are conditional enquiry parameters. They are not a confirmed stock list and remain subject to the buyer’s application, agreed viscosity test method, supplier confirmation and product- or batch-specific documentation.
Group 1
Product identity and grade
Begin with the intended grade, origin requirement and application scope.
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Product and grade | Food-grade guar gum powder E412 | Supplier confirmation required |
| Origin | Indian origin | Product-specific; supplier confirmation required |
| Industrial grade | Buyer-specific enquiry only | Not currently confirmed |
Product identity discussion
Product and gradeSupplier confirmation required
- Discussion point
- Food-grade guar gum powder E412
- Confirmation status
- Supplier confirmation required
OriginProduct-specific; supplier confirmation required
- Discussion point
- Indian origin
- Confirmation status
- Product-specific; supplier confirmation required
Industrial gradeNot currently confirmed
- Discussion point
- Buyer-specific enquiry only
- Confirmation status
- Not currently confirmed
Group 2
Viscosity and the agreed test method
A cps target cannot be compared responsibly unless the measurement conditions are understood.
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Approximately 3,500 cps | Possible buyer target | Method must be agreed; supplier confirmation required |
| Approximately 5,000 cps | Possible buyer target | Method must be agreed; supplier confirmation required |
| Other viscosity target | Buyer should provide the target and complete method | Buyer input required; method must be agreed |
| Test method | Concentration, medium, hydration, temperature, instrument, spindle or geometry, speed and reading point | Method must be agreed |
Viscosity discussion
Approximately 3,500 cpsMethod must be agreed; supplier confirmation required
- Discussion point
- Possible buyer target
- Confirmation status
- Method must be agreed; supplier confirmation required
Approximately 5,000 cpsMethod must be agreed; supplier confirmation required
- Discussion point
- Possible buyer target
- Confirmation status
- Method must be agreed; supplier confirmation required
Other viscosity targetBuyer input required; method must be agreed
- Discussion point
- Buyer should provide the target and complete method
- Confirmation status
- Buyer input required; method must be agreed
Test methodMethod must be agreed
- Discussion point
- Concentration, medium, hydration, temperature, instrument, spindle or geometry, speed and reading point
- Confirmation status
- Method must be agreed
Buyers should provide the concentration, medium, dispersion and hydration procedure, time, temperature, instrument, spindle or geometry, speed and reading point where those details are available.
Group 3
Mesh size
Particle-size wording and test conditions should be connected to handling, dispersion, hydration and process needs.
View mesh-size discussion
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| 100 mesh | Possible buyer-specific option | Not currently confirmed |
| 200 mesh | Possible buyer target | Not currently confirmed |
| Other particle-size requirement | Buyer should provide the target and test or sieve method | Buyer input and supplier confirmation required |
Mesh-size discussion
100 meshNot currently confirmed
- Discussion point
- Possible buyer-specific option
- Confirmation status
- Not currently confirmed
200 meshNot currently confirmed
- Discussion point
- Possible buyer target
- Confirmation status
- Not currently confirmed
Other particle-size requirementBuyer input and supplier confirmation required
- Discussion point
- Buyer should provide the target and test or sieve method
- Confirmation status
- Buyer input and supplier confirmation required
Group 4
Physical and chemical specification considerations
View physical and chemical parameters
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Identity and appearance | Product description, colour, odour and identity criteria where relevant | Product-specific |
| Moisture or loss on drying | Buyer limit and test method should be stated | Buyer input required; product-specific |
| pH | Buyer range and test conditions should be stated | Method must be agreed; product-specific |
| Ash and related criteria | Buyer should identify the required parameter, limit and method | Buyer input required; product-specific |
| Other physical or chemical criteria | Application-, buyer- or destination-specific specification points | Buyer input and supplier confirmation required |
Physical and chemical considerations
Identity and appearanceProduct-specific
- Discussion point
- Product description, colour, odour and identity criteria where relevant
- Confirmation status
- Product-specific
Moisture or loss on dryingBuyer input required; product-specific
- Discussion point
- Buyer limit and test method should be stated
- Confirmation status
- Buyer input required; product-specific
pHMethod must be agreed; product-specific
- Discussion point
- Buyer range and test conditions should be stated
- Confirmation status
- Method must be agreed; product-specific
Ash and related criteriaBuyer input required; product-specific
- Discussion point
- Buyer should identify the required parameter, limit and method
- Confirmation status
- Buyer input required; product-specific
Other physical or chemical criteriaBuyer input and supplier confirmation required
- Discussion point
- Application-, buyer- or destination-specific specification points
- Confirmation status
- Buyer input and supplier confirmation required
Group 5
Microbiology considerations
The required panel and acceptance criteria depend on the product, application, buyer and destination.
View microbiology parameters
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Total count | Buyer should provide the applicable limit and method | Buyer input required; batch-specific evidence |
| Yeast and mould | Buyer should provide the applicable limit and method | Batch-specific evidence required |
| Specified organisms | The required organism panel depends on application, buyer and destination | Buyer input required; batch-specific evidence |
Microbiological considerations
Total countBuyer input required; batch-specific evidence
- Discussion point
- Buyer should provide the applicable limit and method
- Confirmation status
- Buyer input required; batch-specific evidence
Yeast and mouldBatch-specific evidence required
- Discussion point
- Buyer should provide the applicable limit and method
- Confirmation status
- Batch-specific evidence required
Specified organismsBuyer input required; batch-specific evidence
- Discussion point
- The required organism panel depends on application, buyer and destination
- Confirmation status
- Buyer input required; batch-specific evidence
Group 6
Heavy metals, pesticide residues and PCP where relevant
Evidence scope should be defined by the buyer or applicable destination requirement.
View residue and statement parameters
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Heavy metals | Buyer or destination should identify the required elements, limits and method | Destination-specific; evidence required |
| Pesticide residues | Relevant residue scope and limits should be defined for the application and destination | Destination-specific; evidence required |
| PCP | Discuss where relevant to the buyer or destination requirement | Destination-specific; evidence required |
| Allergen or GMO statements | Buyer should state the declaration or evidence expected | Product-specific; issuer confirmation required |
Metals, residue and statement considerations
Heavy metalsDestination-specific; evidence required
- Discussion point
- Buyer or destination should identify the required elements, limits and method
- Confirmation status
- Destination-specific; evidence required
Pesticide residuesDestination-specific; evidence required
- Discussion point
- Relevant residue scope and limits should be defined for the application and destination
- Confirmation status
- Destination-specific; evidence required
PCPDestination-specific; evidence required
- Discussion point
- Discuss where relevant to the buyer or destination requirement
- Confirmation status
- Destination-specific; evidence required
Allergen or GMO statementsProduct-specific; issuer confirmation required
- Discussion point
- Buyer should state the declaration or evidence expected
- Confirmation status
- Product-specific; issuer confirmation required
Group 7
Packaging, MOQ, capacity and lead-time considerations
View packing and commercial parameters
| Parameter | Discussion point | Confirmation status |
|---|---|---|
| Packing | Buyer should provide preferred format, size and labelling needs | Buyer input and supplier confirmation required |
| MOQ | No fixed standard MOQ is published | Supplier confirmation required |
| Capacity | No fixed production or supply capacity is claimed | Supplier confirmation required |
| Lead time | Depends on product, packing, documents and transaction readiness | Supplier and logistics confirmation required |
| Incoterm and freight | FOB Indian port or CIF destination port may be discussed for the specific transaction | Destination- and transaction-specific |
Packing and commercial considerations
PackingBuyer input and supplier confirmation required
- Discussion point
- Buyer should provide preferred format, size and labelling needs
- Confirmation status
- Buyer input and supplier confirmation required
MOQSupplier confirmation required
- Discussion point
- No fixed standard MOQ is published
- Confirmation status
- Supplier confirmation required
CapacitySupplier confirmation required
- Discussion point
- No fixed production or supply capacity is claimed
- Confirmation status
- Supplier confirmation required
Lead timeSupplier and logistics confirmation required
- Discussion point
- Depends on product, packing, documents and transaction readiness
- Confirmation status
- Supplier and logistics confirmation required
Incoterm and freightDestination- and transaction-specific
- Discussion point
- FOB Indian port or CIF destination port may be discussed for the specific transaction
- Confirmation status
- Destination- and transaction-specific
Application and destination
Requirements may change with the intended use and market
A specification should be reviewed together with the application, buyer standard and destination requirements.
Destination-specific
The buyer should identify applicable regulatory, documentary, labelling or customer-standard requirements. SPANORIX does not guarantee destination compliance before evidence is reviewed.
Technical requirement
Prepare the specification context available to you.
Share known grade, application, viscosity method, mesh, quantity, destination, packing and evidence requirements. Validated submissions receive an acknowledgement. We will review your requirement and respond through the appropriate contact route; product and commercial details remain subject to review and supplier confirmation.